1. Description
Our chucks are mainly made for laser pipe cutting machine. The whole chuck can be used as an independent rotating spindle and the work-piece can be clamped tightly and rotate at the same time. After the product base is fixed, to clamp and rotate the work-piece, it only needs to equip with a matching motor and connect it with the gear and meanwhile connect the compressed air source.
The chuck can work in full stroke without additional adjustment of four claws. It can clamp all applicable pipe fittings and improve production efficiency. In the case of low air pressure, a smaller clamping force can be obtained, thereby satisfying the need of processing thin-walled pipe fittings.
The product is widely used in special laser pipe cutters and other pipe processing machine systems.
2. Performance Parameters
|
Model number |
G800D-360 |
| Claw stroke | 260mm |
| Maximum clamping force | 4.1KN |
| Alloable pressure | 0.2-0.9MPa |
| Limit speed | 150r/min |
| Clamping range | 15-360mm |
| Central height | 425mm |
| Rotational inertia | 17.69kg.m2 |
| Rotating part weight | 251kg |
| Whole unit weight | 369kg |
Note: above numbers are standard parameters. We can also design products according to clients' special requirements.
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | O | R | S |
| G800D-360 | 652 | 425 | 800 | 825 | 280 | / | 587 | 405.5 | 360 | 390 | 430 | 650 | 8 | 12-M12 | 18X20 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
|
e. Multiple configurations are available e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
6. Our Service
| a.We are the direct factory with good price and fast lead time. |
| b.Professional design team work with you. |
| c.Professional QC team to guarantee the high quality. |
| d.Providing OEM & ODM service. |
